Send Email
Send SMS

Bharathi ElectronicsBharathi Electronics
Send Email
Send SMS


Products & Services











Sensors

We offer wide range of Electronic Sensors :

Gas Sensor.
Heart Beat Monitoring Sensor.
Temperature Sensor.
Sensors



Photo Electric Switch Diffused

Photo Electric Switch Diffused
Approx. Price: Rs 975 / Piece

Item Code: BE20253

We offer good quality Photo electric switch diffused type.

Specification :-

Operating Voltage : 10-30 VDC
Output : PNP
Sensing distance : 0- 30CM (adjustable )

Other Information

  • Minimum Order Quantity: 1 Piece




Obstacle Sensor

Item Code: BE30006

Specifications:

  • Voltage: 12 V
  • Working Temperature: 10-50 °C

Other Information

  • Minimum Order Quantity: 1 Piece


Obstacle Sensor
Approx. Price: Rs 130 / Piece



Heart Beat Monitor Module

Heart Beat Monitor Module
Approx. Price: Rs 450 / Piece

Item Code: BE30084

We offer Heart beat monitor module .

Easy to attach with Microcontrollers.

Other Information

  • Minimum Order Quantity: 1 Piece




PIR Sensor

Item Code: BE30097

We offer PIR sensor module of parallax make.

PIR Sensor is pyroelectric device that detects motion by measuring changes in the infrared
level emitted by sour rounding object. This motion can be detected by checking for a high signal on the
i/o pin.

Features :
single bit output
small size makes it easy to conceal
Compatible with all micro controller interface.

Other Information

  • Minimum Order Quantity: 1 Piece


PIR Sensor
Approx. Price: Rs 280 / Piece



Motion Sensor

Motion Sensor
Approx. Price: Rs 280 / Piece

Item Code: BE30097A

We offer motion (PIR) sensor module of  parallax make.

PIR Sensor is pyroelectric device that detects motion by measuring changes in the infrared
level emitted by sourrounding object. This motion can be detected by checking for a high signal on the
i/o pin.

Features :
single bit output
small size makes it easy to conceal
Compatible with all microcontroller interface.

Other Information

  • Minimum Order Quantity: 1 Piece




Line Follower - Sensor

Item Code: BE70011

RedBot Sensor - Line Follower

Description: The Line Follower sensor is an add-on for your RedBot that gives your robot the
ability to detect lines or nearby objects. The sensor works by detecting reflected light coming
from its own infrared LED. By measuring the amount of reflected infrared light, it can detect
transitions from light to dark (lines) or even objects directly in front of it.
The sensor has a 3-pin header which connects directly to the RedBot Mainboard via female to
female jumper wires. Use the included RedBot library to detect lines or objects. A mounting hole
lets you easily connect one or more of these to the front or back of your robot chassis.

Dimensions: 0.32 x 1.18 " (8.22 x 30.14 mm)
Features:
  • 5VDC operating voltage
  • Mounting hole
  • 25mA supply current
  • Optimal sensing distance: 0.125" (3mm)

Other Information

  • Minimum Order Quantity: 1 Piece


Line Follower - Sensor
Approx. Price: Rs 300 / Piece



IR Proximity Sensor 150cm Distance

IR Proximity Sensor 150cm Distance
Approx. Price: Rs 1,300 / Piece

Item Code: BE70004

Infrared Proximity Sensor Long Range - Sharp GP2Y0A02YK0F
Description: Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog
output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage between 4.5 and
5.5VDC. The sensor has a Japanese Solder less Terminal (JST) Connector. We recommend
purchasing the related pigtail below or soldering wires directly to the back of the module.
This sensor is great for sensing objects up to 5 feet away!

Other Information

  • Minimum Order Quantity: 1 Piece




Microphone Breakout

Item Code: BE70003

Breakout Board for Electret Microphone

Description: Ready to add audio to your next project? This small breakout board couples a small
electret microphone with a 100x opamp to amplify the sounds of voice, door knocks, etc loud
enough to be picked up by a microcontroller's Analog to Digital converter. Unit comes fully
assembled as shown. Works from 2.7V up to 5.5V.

Other Information

  • Minimum Order Quantity: 1 Piece


Microphone Breakout
Approx. Price: Rs 600 / Piece



Water Flow Sensor

Water Flow Sensor
Approx. Price: Rs 700 / Piece

We deal with water flow sensor which is used to measure water flow rate .

Other Information

  • Minimum Order Quantity: 1 Piece




Humidity Sensor

Item Code: BE30113

We Deal with Humidity sensor .

 

 

Other Information

  • Minimum Order Quantity: 1 Piece


Humidity Sensor
Approx. Price: Rs 400 / Piece



Humidity & Temperature Sensor (hrt393)

Humidity & Temperature Sensor (hrt393)
Approx. Price: Rs 700 / Piece

Item Code: BE30114

Humidity & Temperature sensor

Specifications:

  • Input Voltage range : DC 5.0 (+ -) 0.2V
  • Output Voltage Range : DC 1.0 - 3.0V
  • Measurement Accuracy : (+ -) 5% RH
  • Operating Current (Maximum) : 2mA
  • Storage RH Range : 0 to 99% RH
  • Operating RH Range : 20 to 95% (100% RH Intermittent)
  • Transient Condensation : <3% RH
  • Temperature Range :
    • Storage : -20°C to 70°C
    • Operating : - 0°C to 50°C
  • Hysteresis (RH @25°C) : MAX 2%RH
  • Long term Stability (Typical drift per year) : 1.5%
  • Linearity : Linearity
  • Time response (63% step change) : 1 min
  • Dimensions (L*W) : 3mm * 2mm

Other Information

  • Minimum Order Quantity: 1 Piece




Soil Moisture Sensor

Item Code: BE30116

Features 

·         Digital output, easy to adjust

·         Nickel plating to avoid corrosion

·         Working voltage: 3.3V-5V

·         On-board LM393 chip

·         Dimension of the board: 3.2cm * 1.4cm

Other Information

  • Minimum Order Quantity: 1 Piece


Soil Moisture Sensor
Approx. Price: Rs 450 / Piece



Ultrasonic Sensor

Ultrasonic Sensor
Approx. Price: Rs 175 / Piece

HC SR-04 - Product features:

Ultrasonic ranging module HC - SR04 provides 2cm - 40cm the ranging accuracy can reach to 3mm.
The modules includes ultrasonic transmitter, receiver and control circuit. The basic principle of work:

(1) Using IO trigger for at least 10us high level signal,
(2) The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back.
(3) IF the signal back, through high level , time of high output IO duration is the time from
sending ultrasonic to returning.Test distance = (high level time×velocity of sound (340M/S) / 2.

Easy to Interface conversion boads avilable now ( PWM TO UART , OBSTACLE) - based on PIC microcontroller

  • OBSTACLE INTEFACE BRD

  • UART & OBSTACLE O/P BRD


    Interfacing Pins:
    -> 5V Supply
    -> Trigger Pulse Input
    <- Echo Pulse Output
    -> 0V Ground

    Electric Parameters:

  • Working Voltage DC 5 V

  • Working Current 15mA

  • Working Frequency 40Hz

  • Max Range 40cm

  • Min Range 2cm

  • MeasuringAngle 15 degree

  • Trigger Input Signal 10uS TTL pulse

  • Echo Output Signal Input TTL lever signal and the range in proportion

  • Dimension 45*20*15mm

     

Other Information

  • Minimum Order Quantity: 1 Piece




6DOF MPU-6050 3-Axis Acceleration + Gyroscope Module

Item Code: BE30119

Specifications:

  • On-board MPU - 6050 integrated 6 axis motion processing chip.
  • On-board LDO chip, support 5V / 3.3V voltage input.
  • Commonly used pin have eduction, pin have standard 2.54 mm spacing.
  • Module support IIC standard communication protocol for easy interfacing.
  • 16 bit AD converter that can generate 16 bits of data output.
  • Users can control the accelerator sensor range within 2g, 4g, 8g and 16g.
  • Angular velocity, Sensing range: 250 500 1000 and 2000 / SEC (DPS)

Other Information

  • Minimum Order Quantity: 1 Piece


6DOF MPU-6050 3-Axis Acceleration + Gyroscope Module
Approx. Price: Rs 400 / Piece



Human Sense Based Room Light Control Sensors

Human Sense Based Room Light Control Sensors
Approx. Price: Rs 1,000 / Piece

Item Code: BE30120

Features:

  • Wide operating voltage: AC110V - 250V.
  • The extra-wide delay time adjustment: about 10 seconds - 6 minutes adjustable!
  • Adjustable sensitivity: turn on the lights during the day or night.
  • Sensing distance: 0-7 meters
  • Induction angle degrees: 110-140
  • Load Power: 1W to 200W
  • Sensing Method: Passive Infra Red

 

Other Information

  • Minimum Order Quantity: 1 Piece




4 Channel Capacitive Touch Switch

Item Code: BE30122

Specification:

  • Onboard TTP224 capacitive touch sensor IC 4 keys
  • 4 board-level status indicator
  • Working voltage: 2.4V-5.5V
  • Advanced Pins breakout, so that the output mode and working mode selectable.
  • Low power selection
  • PCB board size: 35 (mm) x29 (mm)

Other Information

  • Minimum Order Quantity: 1 Piece


4 Channel Capacitive Touch Switch
Approx. Price: Rs 520 / Piece



LM2596 DC-DC Buck Converter Step-Down Power Module

LM2596 DC-DC Buck Converter Step-Down Power Module
Approx. Price: Rs 200 / Piece

Item Code: BE30123

Specifications:

  • Module properties: non-isolated step-down module
  • Mode of rectification: non-synchronous rectification
  • Input voltage: 4V-35V
  • Output voltage: 1.25-30V
  • Output current: 3A (MAX)
  • Size: 53mm * 26mm
  • Input mode: IN+ input positive IN- input negative
  • Output mode: OUT+ output positive OUT- output negative

Other Information

  • Minimum Order Quantity: 1 Piece




Temperature Sensor - Waterproof (DS18B20)

Item Code: BE70026

Description: This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.

Dimensions: Probe is 7mm in diameter and roughly 26mm long. Overall length (including wire) is 6 feet.

Features:

  • 3.0-5.5V input voltage
  • Waterproof
  • -55°C to+125°C temperature range
  • ±0.5°C accuracy from -10°C to +85°C
  • 1 Wire interface

Other Information

  • Minimum Order Quantity: 1 Piece


Temperature Sensor - Waterproof (DS18B20)
Approx. Price: Rs 750 / Piece



UV Sensor Breakout - ML8511

UV Sensor Breakout - ML8511
Approx. Price: Rs 1,245 / Piece

Item Code: BE70027

Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal in relation to the amount of UV light that’s detected. This breakout can be very handy in creating devices that warn the user of sunburn or detect the UV index as it relates to weather conditions.

This sensor detects 280-390nm light most effectively. This is categorized as part of the UVB (burning rays) spectrum and most of the UVA (tanning rays) spectrum. It outputs a analog voltage that is linearly related to the measured UV intensity (mW/cm2). If your microcontroller can do an analog to voltage conversion then you can detect the level of UV!

Other Information

  • Minimum Order Quantity: 1 Piece




Capacitive Touch Sensor Breakout -MPR121

Item Code: BE70025

Description: This is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to drive LEDs.

There a four jumpers on the bottom of the board, all of which are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you don’t require the pull-up resistors you can open the jumpers by cutting the trace connecting them.

There is no regulation on the board, so the voltage supplied should be between 2.5 and 3.6VDC. The VREG pin is connected through a 0.1uF capacitor to ground, which means, unless you modify the board, you can’t operate the MPR121 in low-supply voltage mode (1.71-2.75VDC).

Other Information

  • Minimum Order Quantity: 1 Piece


Capacitive Touch Sensor Breakout -MPR121
Approx. Price: Rs 750 / Piece



Gas Sensor Module With Mq3

Gas Sensor Module With Mq3
Approx. Price: Rs 400 / Piece

Item Code: BE60040

Description:
This alcohol sensor module is specially designed to detect alcohol vapours in the air and the module can be set to detect whether the specified concentration s is reached or exceeded. The module has a MQ-3 gas sensor which has high sensitivity to alcohol and could detect alcohol with different concentration.
 
Specifications:
Operating Voltage: 4.5V to 5V DC.
High sensitivity to alcohol gas.
Long life and low cost.
Analog and Digital output available.
Onboard visual indicator (LED) for indicating alarm.
Compact design and easily mountable.
Simple 4 PIN header interface.
 
Package Content:
Alcohoil sensing module with MQ-3 gas sensor.
 
Application:
Breathalyzer.
Portable alcohol detector.

Other Information

  • Minimum Order Quantity: 1 Piece




Gas Sensor Module With Mq2

Item Code: BE60039

This alcohol sensor module is specially designed to detect alcohol vapours in the air Specifications: Operating Voltage: 4.5V to 5V DC High sensitivity to Smoke, Propane, Butane and LPG Good sensitivity to Combustible gas in wide range On board visual indicator (LED) for indicating alarm.

Other Information

  • Minimum Order Quantity: 1 Piece


Gas Sensor Module With Mq2
Approx. Price: Rs 400 / Piece



Tilt Sensor

Tilt Sensor
Approx. Price: Rs 130 / Piece

Item Code: BE60042

Tilt sensors allow you to detect orientation or inclination. They are small, inexpensive, low-power and easy-to-use. When the switch is level it is open, and when tilted, the switch closes. A led is provided as indicator which glows when the sensor is inclined.Specifications Operating Voltage: 3.3 V – 5 V Output indicator light High sensitivity.

Other Information

  • Minimum Order Quantity: 1 Piece




Gas Sensor Module With Mq6

Item Code: BE60041

This alcohol sensor module is specially designed to detect LPG Gas vapours in the air.Specifications: Operating Voltage: 4.5V to 5V DC High sensitivity to Propane, Butane and LPG Good sensitivity to Combustible gas in wide range Analog and Digital output available Onboard visual indicator (LED) for indicating alarm

Other Information

  • Minimum Order Quantity: 1 Piece


Gas Sensor Module With Mq6
Approx. Price: Rs 400 / Piece



TCS230 TCS3200 Color Recognition Sensor

TCS230 TCS3200 Color Recognition Sensor
Approx. Price: Rs 930 / Piece

Item Code: BE60046

Description:

  • Chip: TCS230
  • Input voltage: DC 3 ~ 5V
  • Output frequency voltage: 0 ~ 5V
  • Use bright white LED lights
  • can be connected directly with Microcontroller
  • Static detection of the measured object color
  • Best detection distance: 10mm
  • PCB size: 31.6 (mm) x 24.4 (mm)

Other Information

  • Minimum Order Quantity: 1 Piece




Metal Detect - 1 iSensor nch Coil (Assembled)

Item Code: BE60055

When comes in vicinity of large metallic objects, it detects them and indicates the presence by the buzzer beeping sound.

Other Information

  • Minimum Order Quantity: 1 Piece


Metal Detect - 1 iSensor nch Coil (Assembled)
Approx. Price: Rs 350 / Piece



DHT11 Temperature & Humidity Sensor

DHT11 Temperature & Humidity Sensor
Approx. Price: Rs 220 / Piece

Item Code: BE60050

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

Each DHT11 sensors features extremely accurate calibration of humidity calibration chamber. The calibration coefficients stored in the OTP program memory, internal sensors detect signals in the process, we should call these calibration coefficients. The single-wire serial interface system is integrated to become quick and easy. Small size, low power, signal transmission distance up to 20 meters, making it a variety of applications and even the most demanding applications. The product is 4-pin single row pin package for convenient connection.

Other Information

  • Minimum Order Quantity: 1 Piece




Raindrops Detection Sensor Module

Item Code: BE60053

Description:

  • Sensor uses the FR-04 high-quality double-sided materials, King Size 5.0 x 4.0CM, and with the surface of the nickel plating treatment, against oxidative, conductivity, superior performance and longevity;
  • Comparator output, the signal is clean, waveform, driving ability over 15mA;
  • Distribution bit to adjust sensitivity;
  • Operating voltage: 3.3V-5V
  • Output form: digital switching outputs (0 and 1) and analog AO voltage output;
  • Fixed bolt hole for easy installation
  • Small board PCB size: 3.2cm x 1.4cm
  • Wide voltage LM393 comparator



Pins:

  • VCC: Positive power supply (3-5V)
  • GND: Negative one.
  • DO: TTL switching signal output
  • AO: Analog signal output

Other Information

  • Minimum Order Quantity: 1 Piece


Raindrops Detection Sensor Module
Approx. Price: Rs 400 / Piece



Mini IR Obstacle Detection Sensor

Mini IR Obstacle Detection Sensor
Approx. Price: Rs 60 / Piece

Item Code: BE60068

This is a multipurpose infrared sensor which can be used for obstacle sensing, fire detection, line sensing, etc and also as an encoder sensor. The sensor provides a digital output. The sensor outputs a logic one ( 5V) at the digital output when an object is placed in front of the sensor and a logic zero (0V), when there is no object in front of the sensor. An onboard LED is used to indicate the presence of an object.

Features: 

  • Range of around 25 cm
  • Input Voltage: 5V DC
  • Comes with an easy to use digital output
  • Can be used for wireless communication and sensing IR remote signals
  • Sensitivity can be adjusted using the onboard potentiometer.

Other Information

  • Minimum Order Quantity: 1 Piece




Magnetic Door Switch Set

Item Code: BE70046

his is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or any other aperture opens. These types of switches are primarily used in home security systems. One half of the assembly set on a window or door frame and the other attached to the window or door itself. When the switch set is separated from each other the contact is broken and triggers an alarm.

When each magnet piece comes within 20mm of each other they complete the circuit with the internal reed switches. Each Magnetic Door Switch set can accept a max voltage of up to 100V at 500mA. Additionally each set is housed in durable ABS plastic and, with the included screws, can easily mount to most surfaces.

Dimensions: 34 × 41 × 6.5 mm

Includes:

  • 1x Magnetic Door Switch Set
  • 4x Phillips Mounting Screw

Features:

  • Max Voltage: ≤100VDC
  • Max Current: ≤500mA
  • Max Rating: ≤10W
  • Gap: 20±5mm
  • Contact Mode: NO

Other Information

  • Minimum Order Quantity: 1 Piece


Magnetic Door Switch Set
Approx. Price: Rs 310 / Piece



Non-Invasive Current Sensor - 30A

Non-Invasive Current Sensor - 30A
Approx. Price: Rs 1,200 / Piece

Item Code: BE70032

Description: This non-invasive current sensor (also known as a “split core current transformer”) can be clamped around the supply line of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding to the magnetic field around a current-carrying conductor. By reading the amount of current being produced by the coil, you can calculate how much current is passing through the conductor.

This particular current sensor will measure a load up to 30 Amps which makes it great for building your own energy monitor to keep your power usage down, or even building an over-current protection device for an AC load. This sensor does not have a load resistor built in, so in most cases it will be necessary to place a resistor across the output to convert the coil’s induced current to a very small measurable voltage.

Other Information

  • Minimum Order Quantity: 1 Piece




Solenoid 230V AC

Item Code: BE20352

We deal with solenoids

Technical specification :-
  • Operating Voltage 230V AC.
  • Stroke length 15mm
  • Load pull / push Force  1Kgs

 

Other Information

  • Minimum Order Quantity: 1 Piece


Solenoid 230V AC
Approx. Price: Rs 800 / Piece



Pulse Sensor /heart Beat Monitor

Pulse Sensor /heart Beat Monitor


Item Code:BE60067Heart beat sensor

Other Information

  • Minimum Order Quantity: 1 Piece
Approx. Price: Rs 350 / Piece

Magnetic Door Contact Switch

Magnetic Door Contact Switch


Item Code:BE60008We offer Magnetc door contact switch

Other Information

  • Minimum Order Quantity: 1 Piece
Approx. Price: Rs 200 / Piece


Thermistor 10k NTC

Thermistor 10k NTC


Item Code:BE20359

Other Information

  • Minimum Order Quantity: 15 Piece
Approx. Price: Rs 15 / Piece


 



Bharathi Electronics
M. Thyagarajan (Proprietor)
No. 4/5 A, Union Road, Opposite Mahindra First Choice Service Centre, Kavundampalayam
Coimbatore - 641030, Tamil Nadu, India

Contact via E-mail

Contact via SMS


Home  |  About Us  |  Products & Services  |  Site Map  |  Contact Us  |   Mobile Site

Member IndiaMART.com © Bharathi Electronics. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited