drone

1. Length: 10″.
2. Pitch: 4.5″.
3. Weight: 28 gm.
4. Shaft Diameter: 9.5 mm.
5. Total Length: 10 inch / 250 mm
6. Material: Carbon Nylon

The HD Propellers 1045(10X4.5) Carbon Nylon DJI Black is the high-quality propellers specially designed for multi-copters.

These Propellers are light in weight and high strength propeller has a 15° angle design at the end of the propeller to avoid whirlpool while the multi-copter is flying. They are useful in drones as well as in multi-copters.

The Propellers is of high endurance and flexibility for great impact. The Orange propellers help to improve the air-powered efficiency and aerofoil stability.

Note: 

The Propeller dimensions and weight may have  ±2% error.

We at  passionately deal in this Multicopter/Drone area to encourage and help many DIY makers by supplying every essential product to build and enrich Multicopters/Drones. The Orange is a brand by Robu.in which is aimed at providing quality products to our customers. Do not forget to check more Orange propellers by clicking below,

 Propellers and Accessories

For more accessories including BLDC Motors, Multirotor Frames etc check out our,

Multirotors Category

Features :

1. Durable plastic construction provides both lightness and rigidity.
2. The  HD Propellers 1045(10X4.5) Carbon Nylon DJI Black comes Epoxy resin cover.
3. Very strong and lightweight.
4. Quick to release, quick to attach.
5. New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

1. i-Bus Interface: Yes.
2. Data Acquisition Interface: Yes.
3. Weight:392 gm.
4. Power: 6V (1.5V AA*4).
5. Antenna Length: 26mm * 2 (dual antenna).
6. Transmitting Power: ≤ 20dBm.
7. RF Receiver Sensitivity: -105dbm.

This is the FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver. This is a great entry-level radio for those just starting in the field of drones flying due to the ease of use of this product and an impressive list of features for a first-time radio. FlySky FS-i6 2.4G 6CH PPM RC Transmitter is a 6-channel telemetry 2.4GHz transmitter that uses the reliable Automatic Hopping Digital System (AFHDS) and includes such features as digital trims, backlit LCD screen, and simple programming.

On top of this, you get a slim, modern radio transmitter that fits nicely in your hands and weighs just under 400g and so won’t test your arm stamina on those long flights. This radio is also really practical with a 3-position switch as well as two adjustable knobs for flight modes/ multiple flap positions.

You also get the new FS-iA6B receiver with this kit. This is a compact 6-channel receiver with a range exceeding 500m and it comes with a dual antenna for excellent reception and interference rejection capabilities.  Each transmitter has a unique ID and so when binding, the receiver remembers this ID and accepts data from that transmitter only. This avoids picking up other transmitter signals and dramatically decreases inference and increases safety.

 

Specifications and Features :Features:

1. Entry-level 6 channel 2.4GHz radio with telemetry capability.
2. Dual Rate/Trims/Gear/Flap/Gyro Gain Adjust/Flight Mode/Throttle Hold/Hover Pitch Switches.
3. Easy to use Programming & Navigation Buttons.
4. Supports Heli/Standard Wing/Elevon/V-Tail.
5. 20 Model Memory.
6. 8 Character Model Name.
7. Trainer and charging ports.
8. The backlit LCD screen displays real-time transmitter and receiver voltage.
9. 4 Stick Mode Selectable.
10. Mode 2.
11. It comes with a receiver.

FS-i6 Transmitter Specifications :

1. Model Type: Glider/Heli/Airplane
2. Band: 142
3. 2.4ghz System: AFHDS 2A and AFHDS
4. Code Type: GFSK
5. DSC Port: PS2;
6. Output:PPM
7. Charger Port: No
8. ANT length: 26mm*2(dual antenna)
9. On-line update: Yes
10. Certificate: CE0678,FCC
11. Model Memories: 20
12. Channel Order: Aileron-CH1, Elevator-CH2, Throttle-CH3, Rudder-CH4, Ch 5 & 6 open to assignment to other functions.

FS-iA6B Receiver Specifications :

1. Channel: 6.
2. Frequency Range: 2.4055–2.475 GHz.
3. Band Width Number: 140
4. Transmitting Power: ≤ 20 dBm.
5. RF Receiver Sensitivity: 105 dBm.
6. 2.4G Mode: The second generation of an enhanced version of the automatic FM digital system.
7. Encoding: GFSK.
8. Antenna Length : 2 x 26 mm (dual antenna).
9. Input Power : 4.0 – 8.4 VDC (2A).
10. Dimension : 47 x 26.2 x 15 mm
11. Weight : 14.9 gm.
12. Data Acquisition Interface: Yes.
13. Model Type : Airplane / Glider / Helicopter.
14. Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i10, FS-GT2E, FS-GT2G.

Package Includes :

1 x FlySky FS-i6 2.4G 6CH PPM RC Transmitter.
1 x FS-iA6B receiver
1x User Manual BookLet.

Additional Information:

• Delivery Time: 2 DAYS

Product Details:

Dual Micro USB 3.7v to 5V 2A Mobile power bank charging module DIY 18650 Lithium Battery with LED. This is the mobile power module Accessories, 18650 Circuit board shell. Meet the individual needs of your DIY, but you must understand basic electronic assembly.

To know more about Arduino Powerbank click here!

For more Lipo charger visit here!

We need to note the following points when installing products:

1. Batteries to parallel, the voltage in 3.2-4.2V can work between, 18650 flat and polymer battery can be.
2. We can connect the battery to the motherboard B + negative-, installed against the necessary burning motherboard.
3. New and old batteries, model brand inconsistent batteries cannot be mixed.

Features:

1. 4-level LED lamp display power, not working state intelligent automatic shutdown;
2. The built-in lithium battery protection IC, over-current, overpressure, under-voltage protection;
3. Dual USB output ports.
4. Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5V 1A above
5. Requirements for rechargeable batteries:
6. Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery.

your Knowledge about Flight controllers as well as the working of the accelerometer and Gyroscope. The KK 2 Flight Controller Board with 6050 MPU Board and Atmel 644PA is the next generation of KK flight control boards. It comes preinstalled with the KK 2 firmware and features advanced processor technology from STMicroelectronics, sensor technology, InvenSense system delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

Product Details:

FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver is the popular 6 Channel Radio CT6B manufactured by FlySky. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER radio is a value for money, entry level 6 channel transmitter, ideal for quadcopters and multicopters that require the 6ch operation.

This radio has two retract switches and proportional flap dials in easy reach for channels 5 and 6. It can be powered by 8 x AA Size Batteries or a 12V Power Supply. It comes with a trainer port to help beginners learn flying.It can be configured by connecting it to the computer. Use the T6config software to configure your radio on a computer.

 

Features : 

1. Super active and passive anti-jamming capabilities.
2. Very low power consumption.
3. High receiving sensitivity.
4. 8 model memory, digital control.
5. Can be programmed by PC with included software.
6. Full range 2.4GHz 6-channel radio.
7. 4-Model
8. 4 Types (Airplane, Heli90, Heli120, Heli140).
9. Integrated
10. Contrast Adjustment.
11. Throttle cut.
12. Computer
13. USB Socket.
14. Use a linear spread of fine paragraph by excess antenna.
15. It covers the entire band width of he antenna bandwidth range.
16. High quality and stability.

Package Includes :

1 x FS-CT6B Transmitter

1 x FS-r6B Receiver

1 x USB Interface Cable

1 x Software CD

1 x Receiver Binding Cable

1 x User Manual

Additional Information:

• Delivery Time: 2 DAYS

11.1V 2200mAH Lipo battery is Capable of maximum continuous discharge rates up to 30C, placing this battery among the most powerful Li-Po battery packs in its class! It offers an excellent blend of weight, power, and performance. Imax B3 AC Compact Charger is a simple and compact LiPoly balance charger for 2~3s batteries. Imax B3AC makes an ideal pocket-sized charger to keep in your field box.
Applications:
It is applicable from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models
Safety Precautions:

Avoid over-charging or over-discharging the batteries.

Do not put it beside the high-temperature condition.

Don’t throw it into the fire or Water

Package Includes:
1 X 11.1V 2200MAH 3S 80C LiPo Battery 

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Additional Information:

• Minimum Order Quantity: 1 Piece