|Distance Measuring Range||3-80CM|
|Current Rating||500 mA|
|Operating Temperature||0 to+55 degree C|
|Sensing Distance||5 mm|
|Supply Voltage||12 V DC|
|Switching Frequency||50 Hz|
The Objective of this project is to develop a system to keep the vehicle secure and protect it by the occupation of the intruders.
We can't take care of ours while in running by less conscious. If we done all the vehicles with automated security system that provides high security to driver, also gives alarm.
This Eye Blink sensor is IR based. The Variation Across the eye will vary as per eye blink. If the eye is closed means the output is high otherwise output is low. This to know the eye is closing or opening position. This output is give to logic circuit to indicate the alarm.
This can be used for project involves controlling accident due to unconscious through Eye blink.
|Minimum Order Quantity||1 Piece|
|Nominal Field of View:||100 Degree|
The KY-003 Hall Magnetic Sensor consists of a 3144EUA-S sensitive Hall-effect switch for high-temperature operation, a 680Ω resistor and a LED. Compatible with popular electronics platforms like Arduino and Raspberry Pi.
|Operating Voltage||4.5V to 24V|
|Operating Temperature Range||-40°C to 85°C [-x°F to x°F]|
|Dimensions||18.5mm x 15mm [0.728in x 0.591in]|
Connect the Power line (middle) and ground (-) to +5 and GND respectively. Connect signal (s) to pin 3 on the Arduino.
Reviewed by 122 Users
Most Relevant Reviews