Peltier Modules

Looking to cool down your DIY project or any electronic device then you are at the right product. The TEC1 12706 40×40 mm Thermoelectric Cooler 6A Peltier Module is the simple application of the Peltier Thermoelectric Effect. The module features 127 semiconductor couples in the area of 40 x 40mm which very effectively cools and heats up to 90°C.

The thermoelectric cooler is also known as TEC or Peltier Module creates a temperature differential on each side. One side gets hot and the other side gets cool. They use to either warm something up or cool something down; above all, you can use either side. You can also take advantage of a temperature differential to generate electricity.

A thermoelectric cooler (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely useful in industrial areas, for example, computer CPUs, CCDs, portable refrigerators, medical instruments, and so on.

Operating Tips:

1. Max. Operating Temperature: 138 Degree C
2. Do not exceed Imax or Vmax when operating a module.
3. Please carry out moisture protection options (sealing) in final application use.
4. Life expectancy: 200,000 hours
5. Failure rate based on longtime testings: 0.2%.

1. Model number: TEC1-12706
2. Operating Voltage: 12V
3. Maximum Voltage Umax (V) : 15.4V
4. Maximum Current Imax (A) : 6A
5. Maximum Power: 92 W
6. Maximum Temperature: 138°C
7. Power Cord: 200mm

Additional Information:

• Minimum Order Quantity: 1 Piece

• Model: TEC1-12715(""TE"" is the abbreviation of Thermo-Electric) Max cooling power: 136.8W
• Precise temperature control. Solid state, vibration free, noise-free. Simple to install and operate. Each device is fully inspected and tested. Fitted with 14cm insulated leads .
• Perimeter sealer for moisture protection. This device must be used in conjunction with a heat sink to avoid burned. Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler , alternate power sources, or even for your own custom car drink warmer/cooler.
• Operates from 0-15.4 volts DC and 0-15 amps ?Tmax : greater or equal 68 °C Operates from -50 °C to 100 °C Size: 40mm x 40mm x 3.6mm Common specifications of thermoelectric coolers: 1.Operating temperature range: -50 ~100? 2.Flatness /- 0.05mm 3.Height of thermoelectric module tolerated /- 0.2mm 4.Maximum compressive load: 1MPa 5.Lead wire: 150mm as defaut.
• This Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or other block of metal to pull heat from the hot side., use epoxy on peltier module and connect the heat sinks together better Copper past

• TEC1-12709 Thermoelectric Cooler Peltier 12V 90W
• Model number: TEC1-12709
• Voltage(V): 12V Umax (V): 15.4V Imax (A): 9A
• QMax (W) : 138.6W
• Dimensions : 40mm x 40mm x 3.6mm

• 40 x 40 mm Thermoelectric Power Generator Peltier Module TEG High Temperature 150 Degrees.
• Red wire to positive, black wire to negative, it generates electricity when the temperature difference occurred.
• No moving parts, easy to move.
• High reliability and no pollution.
• Small size, lightweight, long life.

The Water Cooling Head Water Cooling Plate, sized at 40*40mm, serves as a crucial component for effectively dissipating heat generated by electronic devices. Built from high-quality materials like copper or aluminum, it conducts heat away from components such as CPUs or GPUs efficiently. Its compact design ensures compatibility with various systems while providing ample surface area for heat transfer. This plate integrates seamlessly with water cooling systems, featuring inlet and outlet ports for water circulation. Whether used in computer systems, LED lighting, or power electronics, this cooling plate ensures optimal performance and reliability by efficiently managing heat dissipation. Its versatile design and ease of installation make it a practical choice for diverse applications where effective thermal management is paramount.

Features:

1. Heavy Aluminum build
2. Internal flow channel extrusion forming
3. Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling

Package Includes:

1 x Water Cooling Head Water Cooling Plate 40*40mm