Raspberry Pi & accessories

Product Details:

Model-Raspberry Pi 4 Model-B

Processor- Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz

Operating Power:-

 
 

 5 Volt 3 Ampere DC via GPIO Header

 5 Volt 3 Ampere DC via USB Type-C Connector

 Power Over Ethernet (PoE)–Enabled (requires separate PoE HAT)

 
 

 GPIO- (Fully backward compatible with previous boards)

Multimedia:- 

 
 

 H.264 (1080p60 decode, 1080p30 encode);

 H.265 (4Kp60 decode);

 OpenGL ES, 3.0 Graphics

 
 

Video and Sound:-

 
 

 2 × micro HDMI ports (up to 4Kp60 supported)

 2-Lane MIPI CSI Camer a Port

 2-Lane MIPI DSI Display Port

 4-Pole Stereo Audio and Composite Video Port

 

Additional Information:

• Item Code: BE60114
• Port of Dispatch: COIMBATORE
• Delivery Time: 2 days

Product Details:

Description:Raspberry Pi Foundation has launched a new Product named Raspberry Pi PICO which is very cheaper as compared to other Raspberry Pi Products.Almost one and half-year before Raspberry had launched a revolutionary update on their Single Board Computer (SBC) Pi 3 and become most popular Microcontroller board in the community which is known as a Raspberry pi 4. On the same timeline, the Raspberry pi foundation came with new astonishing SBC named as a Raspberry Pi PICO.
The main highlighted thing about RPI PICO it is the Lowest cost and Smallest size development board from Raspberry pi Foundation ever. On the technical side, it is equipped with RP2040 Microcontroller chip developed by Raspberry Pi Foundation itself. RP400 is their first dual-core ARM Cortex M0+ processor-based latest small-sized, budget-friendly microcontroller.The RP2040 is supported with both c / c ++ and micro-python, meaning that if you're a beginner and want to learn any of these languages, the Raspberry Pico would be the best product-option to start with.
Features of Raspberry Pi Pico:-1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom2. Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz3. 264KB of SRAM, and 2MB of onboard Flash memory4. The castellated module allows soldering directly to carrier boards5. USB 1.1 with device and host support6. Low-power sleep and dormant modes7. Drag-and-drop programming using mass storage over USB8. 26 multi-function GPIO pins9. 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 16 controllable PWM channels10. Accurate clock and timer on-chip11. Temperature sensor12. Accelerated floating-point libraries on-chip13. 8 Programmable I/O (PIO) state machines for custom peripheral support

Specifications of Raspberry Pi Pico:-Model Raspberry Pi PICOOperating Voltage (VDC) 1.8 ~ 5.5Processor RP2040 (Dual-core Arm Cortex M0+) By Raspberry PiInterface 2 x UART, 2 x I2C, 2 x SPI, up to 16 PWM channelsRAM 264 KBGPIO 26 PinsClock Speed 133 MHzOn Board Ports Micro-USB 5V/2.5A DC Power Input PortOperating Temperature Range (C)     -20 to 85Length (mm) 51Width (mm) 21Height (mm) 4 Package Includes:1 x Raspberry PI PicoRequest
Callback

Product Details:

From light displays and IoT devices to signage and manufacturing processes, Raspberry Pi Pico gives you the power to control countless home, hobby, and industrial operations.

Programmable in C and MicroPython, Pico is adaptable to a vast range of applications and skill levels, and getting started is as easy as dragging and dropping a file.

More experienced users can take advantage of Raspberry Pi Pico's rich peripheral set, including SPI, I2C, and eight Programmable I/O (PIO) state machines for custom peripheral support.

Now available with wireless connectivity or pre-soldered headers, for even more flexibility in your projects.

Connect wirelessly

Network your Pico for a complete IoT solution. Raspberry Pi Pico W comes with a fully certified module on board featuring 2.4GHz 802.11n wireless LAN, making it the perfect solution for loT applications and projects requiring wireless communication. Pico W is available now for $6.

A low cost, flexible microcontroller board with wireless, built around Raspberry Pi's RP2040 chip.

Raspberry Pi Pico W is Raspberry Pi's first wireless microcontroller board, designed especially for physical computing. Microcontrollers are a different type of device than Single Board Computers (like the Raspberry Pi 4 and previous generations of Pi), they don't run an operating system and they are typically programmed to do just one task - though that task can be pretty intricate and exciting! They're perfect for experimenting with hardware and using as the brains of custom devices, machines and inventions. With the onboard 2.4GHz wireless capabilities of the Pico W, it's now possible for your creations to talk to each other, and to the internet!

Apart from the addition of wireless networking, Raspberry Pi Pico W is very similar to Raspberry Pi Pico and, like all RP2040-based boards, can be easily reprogrammed

Raspberry Pi Pico W has been designed to be a low cost yet flexible development platform for RP2040, with a 2.4GHz wireless interface and the following key features:

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
• 264kB of SRAM, and 2MB of on-board Flash memory
• On-board single-band 2.4GHz wireless interfaces (802.11n)
• Castellated module allows soldering direct to carrier boards
• USB 1.1 Host and Device support
• Low-power sleep and dormant modes
• Drag & drop programming using mass storage over USB
• 26 multi-function GPIO pins
• 2×SPI, 2×I2C, 2×UART, 3×12-bit ADC, 16×controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating point libraries on-chip
• • 8×Programmable IO (PIO) state machines for custom peripheral support

  Raspberry Pi Pico W and Pico WH incorporate an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth 5.2; of these, only wireless LAN is supported at launch

 

Additional Information:

• Delivery Time: 2 DAYS

• The heat sink has good heat dissipation performance, long service and prevents the mainboard from overheating
• Thermal tape backing. Peel and stick in the direction of maximum airflow, with high thermal conductivity and long-lasting adhesion
• Fast and easy installation:Throttling is no longer needed reduce chip hot spots and increase heat dissipation surface area
• Only compatible for Raspberry Pi 4 Model B
• Package Include: 1 x Heatsinks set(Not include other accessories)

Product Details:

The Raspberry Pi 4 with 4GB Ram features dual display micro HDMI ports which supports H 265 decode for 4K video at 60p
It is integrated with quad-Core 64-bit broadcom 2711 and cortex A72 processor
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
The Raspberry Pi 4 4 GB RAM has an operating power of 5V at 3A via USB type-C port

Product Details:

Raspberry pi 4 heat sink case with two fans

Additional Information:

• Item Code: SAT10001
• Delivery Time: 3 WORKING DAYS UPON THE RECEIPT

Product Details:

• Please select appropriate display resolution & refresh rate for proper display output. HDMI A Male to A Male Cable: Supports Ethernet, 3D, 4K video and Audio Return Channel (ARC)
• Connects Blu-ray players, Fire TV, Apple TV, PS4, PS3, XBox one, Xbox 360, computers and other HDMI-enabled devices to TVs, displays, A/V receivers and more
• Cable allows you to share an Internet connection among multiple devices without the need for a separate Ethernet cable
• Meets HDMI 2.0 standards (4K Video at 60 Hz, 2160p, 48 bit/px color depth) that supports bandwidth up to 18Gbps and backwards compatible with earlier versions
• Cable Length: 6 feet (1.8 meters)

1. Output power: 5 V DC/4 A
2. Compatible with: RPI 3B+ and RPI 4

Product Details:

40 Pin Red GPIO Extension Board for Raspberry Pi which designed for the Raspberry Pi B+ / A+ / Pi 2 that can break out all the power, GPIO, I2C and SPI pins from the 40pin header onto a solderless breadboard.

Can plug the 40pin GPIO Ribbon Cable between the Raspberry Pi B+ / A+ / Pi 2 Board and the GPIO Extension Board. the GPIO Extension Board can plug into any solderless breadboard.

This is for Raspberry Pi 3, 2 Model B, B+, A+ & Zero accessories, T-type GPIO expansion board Cobbler Plus, convenient for you to an external GPIO, applicable to the breadboard experiment.

Package Includes :

1 x 40 Pin Red GPIO Extension Board for Raspberry Pi

Additional Information:

• Delivery Time: 2 days

• Fully Compatible with Both the Model A and Model B Raspberry Pi
• 5MP Omnivision 5647 Camera Module
• Still Picture Resolution: 2592 x 1944
• Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
• 15-pin MIPI Camera Serial Interface - Plugs Directly into the Raspberry Pi Board
• Size: 20 x 25 x 9mm
• Weight 3g
• Fully Compatible with many Raspberry Pi cases

Additional Information:

• Item Code: BE50021
• Minimum Order Quantity: 1 Piece

T-Cobbler Plus V2 with cable 

Additional Information:

• Item Code: BE60254
• Minimum Order Quantity: 1 Piece
• Production Capacity: 100
• Packaging Details: Carton box