Components

• specifications
• Product Name : LED Digital Display Tube
• Type : Common Anode
• Model :40101BS
• Common Anode : 1-8
• Digital Display : 1 Digit
• Digital Number : 1 Bit 7 Segment
• Emitted Color : Red
• Pin Number : 10
• Continuous Forward Current : 20mA
• Average Forward Voltage : 2V
• Power Consumption : 36mW
• Luminous Intensity : 11mcd
• Number Height : 4 inch
• Panel Size : 122 x 90 x 15mm / 4.8 x 3.54 x 0.59 inch (L*W*H)
• Total Size :  122 x 90 x 23.3mm / 4.8 x 3.54 x 0.92  inch (L*W*H)
• Color : Black, White
• Package Content : 1 x LED Digital Display Tube

Nordic nRF24L01+ 2.4 GHz Wireless Transceiver
Package Contents:

• 1 piece of nRF24L01+ transceiver

 

Additional Information:

• Item Code: BE60049
• Minimum Order Quantity: 1 Piece

Product Details Dimensions

Additional Information:

• Minimum Order Quantity: 1 Piece

• TowerPro SG90 is a high quality, low-cost servo for all your mechatronic needs. It comes with a 3-pin power, control cable and mounting hardware.
• Features:
• 3 pole ferrite, all nylon gear
• Top ball bearing
• Operating Voltage: 4.8V~6.0V
• Operating speed: 0.12sec/60 degree
• Output torque: 1.6kg/cm 4.8V
• Dimension: 21.5 x 11.8 x 22.7mm
• Weight: 9g
• The wire colors are Brown-Red-Orange:
• Red - battery positive
• Brown - battery negative
• Orange - signal

Additional Information:

• Item Code: BE20325
• Minimum Order Quantity: 1 Piece

Product Details:

Specifications:

• Watt: 20 approximate or nearest higher value.
• Input Power : 110-240v
• Temperature: 380 degree c
• Freqency:50-60hz

 

Additional Information:

• Item Code: BE20326

• Voltage: 3-3.6V
• Max output power: +20 dBm
• Working current in transmit mode: 115mA
• Working current in receiver mode: 45mA
• Current in mode: 4.2uA
• Operating temperature: -20-70 degree
• Receiver sensitivity: -92dBm in 2Mbps mode, -95dBm in 1Mbps mode, -104dBm in 250kbps mode
• PA growth: 20dB
• LAN growth: 10dB
• LAN noise figure: 2.6dB
• Antenna growth: 2dBI
• 2M rate: 520m

Additional Information:

• Item Code: BE60227
• Minimum Order Quantity: 1 Piece

owerpro MG90S Metal Gear Servo MotorMicro Servo Motor MG90S TowerPro2.2 kg-cm
Product Description

• Brane name: Towerpro
• Item Name: MG90S servo
• Weight: about 13.4g
• Dimension: 22.8 x 12.2 x 28.5mm
• Stall Torque: 1.8kg/cm(4.8V ),2.2kg/cm(6V)
• Operating Speed: 0.1sec/60degree(4.8v), 0.08sec/60degree(6v)
• Operating Voltage: 4.8-6.0V
• Motor Type: coreless motor
• Gear Type: all metal gear
• Connector Wire Length : 175mm

Features

• Micro size
• Great for truck, Boat, Racing Car, Helicopter and Airplane

Additional Information:

• Minimum Order Quantity: 1 Piece
• Delivery Time: 2 days

1. 400 tie points
2. 2 Power lanes, Total 100 tie points in power lanes
3. 1 Double strip, Total 300 tie points
4. Perfect for Arduino shield prototyping and testing
5. Plastic housing, metal contact clips

400 Tie Points – Solderless Breadboard is a high-quality breadboard with power lanes and printed top face for easy prototyping.

A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components.

It is Reusable for fast build a prototype of an electronic circuit – will accept transistors, diodes, LEDs, resistors, capacitors and virtually all types of components – No soldering required – Can modify or revise the circuits easily Fit for jumper wire of 0.8mm diameter – Standard 2.54mm hole spacing Adhesive sheet on the backside of the board – Multiple breadboards can be spliced together too.

Specifications and features:

1. 400 tie points
2. 1 Double strip, Total 300 tie points
3. 2 Power lanes, Total 100 tie points in power lanes
4. Perfect for Arduino shield prototyping and testing
5. Plastic housing, metal contact clips

Additional Information:

• Minimum Order Quantity: 1 Piece

A GL-12 830 Points Solderless Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components.

Parts will not be damaged so they will be available for re-use afterward. 840 Tie points – 128 Groups of 5 connected terminals, 8 Bus of 25 connected terminals Reusable for fast build a prototype of an electronic circuit – will accept transistors, diodes, LEDs, resistors, capacitors and virtually all types of components – No soldering required – Can modify or revise the circuits easily Fit for jumper wire of 0.8mm diameter – Standard 2.54mm hole spacing Adhesive sheet on the back side of the board – Multiple breadboards can be spliced together too.

Features:

1. 100% brand new and high quality
2. Practical and useful
3. Solderless breadboard with 840 points
4. Completely reusable and have a self-adhesive back
5. Easy component placement

• Voltage: 3.0 V – 5 V.
• Driver: APC circuit.
• Line length: about 135 mm.
• Transmit power: 58mW.
• Operating Current: 40mA.
• Operating Current: 40mA.
• Operating temperature: -36¿¿¿C ~ 65¿¿¿C

Additional Information:

• Item Code: BE30162
• Minimum Order Quantity: 1 Piece

1. Good sensitivity to CO/Combustible gas
2. High sensitivity to Methane, Propane and CO
3. Long life and low cost
4. Simple drive circuit
5. Input voltage: DC 5±0.2V
6. Power: 150mA
7. DO output: TTL digital 0 and 1 (0.1 and 5V)
8. AO output: 0.1-0.3V (relatively clean), the highest concentration voltage is about 4V.

Additional Information:

• Item Code: BE50013
• Minimum Order Quantity: 1 Piece

1. Operating voltage: DC 5 V.
2. IC driver: LM 393.
3. Size : 11 x 33 x 20 mm.
4. Range: 10 to 1000 ppm.
5. Characteristic gas: 100 ppm CO

Additional Information:

• Item Code: BE50014
• Minimum Order Quantity: 1 Piece

Product Details:

We are a top-notch organization, engaged in providing Multimeter Mastech MAS830L

Heating voltage: 5 ± 0.2V (AC · DC Working current: 5-10mA Detectable concentration range: PH0-14 Detection Temperature range: 0-80  Response time: ≤5S Settling Time: ≤60S Component Power: ≤0.5W Working temperature: -10 ~ 50 ° (nominal temperature 20  Humidity: 95% RH (nominal humidity 65% RH Module Size: 42mm × 32mm × 20mm Output: analog voltage signal output

Additional Information:

• Item Code: BE60207

• Diameter = 0.625" (~16mm)
• Overall thickness = 0.125" (~3mm)
• Working Voltage = 3V to 5V
• Working Current = ~4mA at 5V

Additional Information:

• Item Code: BE60134

Product Details:

100% Brand New and High Quality. The world's smallest usb microphone. USB Microphone for PC or Mac. Driver-free, plug and play. Advanced digital USB provides superior clarity with the simplicity of a single USB plug-&-play connection. Noise-cancelling microphone filters out unwanted background noise. Power switch illuminates when microphone is active. Power switch illuminates when microphone is active. Sensitivity:-67 dBV/pBar.-47 dBV/Pascal+/-4dB. Frequency response:100-16kHz. 8'shielded cord with USB connector. Size: 2cm x 2cm x 0.5cm - 0.79inch x 0.79inch x 0.20inch. Materials:Plastic Package Content: 1PC USB Microphone.

Additional Information:

• Delivery Time: 1 DAY

Product Details:

Step Angle: 1.8 °Current: 1.2 A/PhaseHolding Torque: 4.2 kg-cmDetent torque: 2.2 N.cm (Maximum)Lead Wires: 4Shaft diameter: 5 mmThe stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The NEMA17 4.2 kg-cm Stepper Motor can provide 4.2 kg-cm of torque at 1.2A current per phase.
The motor’s position can be commanded to move or hold at one position with the help of Stepper Motor Drivers. The NEMA17 4.2 kg-cm Stepper Motor provides excellent response to starting, stopping and reversing pulses from stepper motor driver.
They are very useful in the various application, especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc.

Product Details:

59tyd-375-2b
ac 220v 50hz
power:13w 0.47uf
speed:20rpm 

Description:

This is MAX7219 Based Serial 8-Digit 7 connect all common microprocessor. Each data can be addressed in the update without rewriting all displays. MAX7219 also allows the user to select each data encoding or no coding.

The display also has a 150µA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display 1-8 bit data.

Technical Specifications:

• No of Digits: 8
• Power: 5V
• Interface Type: SPI, QSPI, MICROWIRE Serial Interface
• Maximum Clock : 10MHz
• Digit LED Color: Bright RED
• Cascading Ability: Can be chained or cascaded to drive unlimited units
• Display Driver: MAX7219
• Material: PCB + Electronic Components
• Size: 82 x 15 x 18mm

Voltage ; 220v-240v
current ; 0.14amp
Power ; 23/22w
frequency ; 50/60Hz
We are one of the prominent manufacturers, suppliers and retailers, service provider of a vast range of Embedded Development Boards, Electronic Counters, Self Learning Kit & many more and service providers of Electronic Project Services.

Additional Information:

• Item Code: BE50008
• Minimum Order Quantity: 1 Piece

Product Details:

49TYD-500 Synchronous AC MotorVoltage - 220/240V AC 50/60 HZType - SynchronousPower - 4 WRPM - 5/6 RPM

• 49TYD-500 Synchronous AC Motor
• Voltage - 220/240V AC 50/60 HZ
• Type - Synchronous
• Power - 4 W
• RPM - 5/6 RPM

Product Details:

• This Board can be used to Control Solonoids,Motors etc
• Input Logic -5v level from MUC
• Interfaced with Transister 547
• Input Pin connected to Burg stick

• This Board can be used to Control Solonoids,Motors etc
• Input Logic -5v level from MUC
• Interfaced with ULN 2803
• Input Pin connected to Burg stick

Additional Information:

• Item Code: BE30021A
• Minimum Order Quantity: 1 Piece