Robotic Kit

Product Details:

    obstacle avoidance robot using ultrasonic sensor

   

Product Details:

Robot Arm Gripper 

• Metal chasis
• 12v Geared motor installed .

Features:Follows black line between the sensors Specifications:Working voltage: DC 3VChasis : PlasticS ensing : LDR based Motor drive : Transistor based Motor : 3v Geared motor

Additional Information:

• Item Code: BE60143
• Minimum Order Quantity: 1 Piece

The BO Series 2 100RPM DC Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM.

The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms.

We are supplying the range BO(Battery Operated) Motors with varying RPM and Gear-Box arrangement, click on the name below for more information

BO Motors

Note: These Motors are available in three different colors i.e. Yellow, Black, and white, we will ship it randomly.Features :

1. Cost-effectiveness of the injection-molding process.
2. Elimination of machining operations.
3. Low density: lightweight, low inertia.
4. Uniformity of parts.
5. Capability to absorb shock and vibration as a result of elastic compliance.
6. Ability to operate with minimum or no lubrication, due to inherent lubricity.
7. The relatively low coefficient of friction.
8. Corrosion-resistance; elimination of plating, or protective coatings.
9. The quietness of operation.
10. Tolerances often less critical than for metal gears, due in part to their greater resilience.
11. Consistency with the trend to greater use of plastic housings and other components.

• Brand: Robosoft Systems.ROBOSOFT SYSTEMS MOBILE ROBOT ARM DIY LEARNING KIT
• Colour:Black And White.MOBILE WITH GRIPPER AND GEARBOX MODULE DO IT YOURSELF
• MOBILE PLATFORM ROBOTIC ROBOT REMOTE PROJECTS
• DO IT YOURSELF DIY LEARNING KIDS ROBOT TEACHING PHYSICS
• ROBOT FOR SCHOOL KIDS ENGINNERING STUDENTS HOBBY

Material: MDF (wooden fiberboard), Best for projects purpose4 Degree of freedomArdno/IoT compatibleSemi assembled, Easy to run, complete robotic armBranded Kit4Curious Product

The six-degree-of-freedom machine is widely used in the teaching field of colleges and universities, personal DIY production and maker education.

It can be regarded as a simple multi-degree-of-freedom demonstration platform. Its power system is composed of six servo motors, which can realize the demonstration of grasping and carrying of the manipulator before and after, up and down, and left and right.

All the supporting parts are made of 2mm thick aluminum plate, which effectively improves the stability of the manipulator itself.

The steering gear is equipped with MG996 metal steering gear, which makes the output more stable. The digital steering gear with large torque can also be used.

The steering joints are equipped with imported cup bearings, which can not only make the steering more flexible, but also make the steering of the steering gear in the same center.

The chassis is in the form of a disc, so that the manipulator rotation from side to side more flexible and smooth.

Specification:

Material: Metal

Color: As picture shown

Size: Approx. 43 x 10 x 10 mm / 1.69 x 0.39 x 0.39 inch

Package Includes:

1 Set Robot Mechanical Arm Kit(without Steering Gear)

DIY 3-Axis Control Palletizing Robot Arm Model With Servos And Servo Arm Plate For Arduino UNO MEGA2560 Smart Robot Car.

Features:
1. 3-DOF manipulator! Vertical arm up and down, back and forth.
2. U-type robot waist bracket on the arm can be mounted directly on the base in the car or any other desktop platform.
3. The vehicle type 3-DOF manipulator medium length, back and forth up and down, in which a mechanical claw opening and closing of the steering gear control, two servo control arm up and down back and forth.
4. This robot is particularly suitable as a vehicle manipulator robot car, grab the ball, catch the car are particularly good, very suitable for their own DIY or robotic smart car racing.
5. Activities can use 180 degree steering joints.

Mechanical parameters :
1. Turning radius: 240mm.
2. Height: 290mm (gripper closed).
3. Front clamp maximum opening: 55mm.
4. Needs 3 Metal rudder.

Items included:
1. 2 x Multi-functional servo bracket.
2. 1x Long U-type servo bracket.
3. 1 x L-type servo bracket.
4. 1 x U-type robot waist bracket.
5. 1 x Aluminium Clamp Claw.
6. 3 x Metal Servo Arm plate.
7. 1 x Miniature Ball Radial Bearing.
8. 1 x Screw and screw cap set.
(Not assembled, just a kit)

Description: This version of the QRE1113 breakout board features a digital output, using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available, and can be used in both 3.3V and 5V systems.The board’s QRE1113 IR reflectance sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate. A 100Ω resistor is on-board and placed in series with the LED to limit current. The output of the phototransistor is tied to a 10nF capacitor. The faster that capacitor discharges, the more reflective the surface is.These sensors are widely used in line following robots. White surfaces reflect more light than black, so, when directed towards a white surface, the capacitor will discharge faster than it would when pointed towards a black surface.The power input and output pins are brought out to a 3-pin, 0.1" pitch header. The board also has a single mounting hole if you want to screw it onto something.We also have an analog version of this board.Dimensions: 0.3x0.55"Features:5VDC operating voltage25mA supply currentDigital I/O compatibl

Additional Information:

• Item Code: BE70055
• Minimum Order Quantity: 1 Piece(s)
• Port of Dispatch: COIMBATORE

Metal 4 wheel chassis

Additional Information:

• Minimum Order Quantity: 1 Piece

Additional Information:

• Item Code: BE60082