DronesOffering you a complete choice of products which include kk2 flight controller.
Approx. Price: Rs 3,200 / PieceGet Latest Price
|Speed At Rated Load||8.4 in/min|
|Voltage||12 V DC|
|Rated Load||250 lb|
The Robocraze KK2.1.5 Multi-Rotor controller is a flight control board for multi-rotor aircraft (Tricopters, Quadcopters, Hexcopters etc). Its purpose is to stabilize the aircraft during flight. To do this it takes the signal from the 6050MPU gyro/acc (roll, pitch and yaw) then passes the signal to the Atmega644PA IC. The Atmega644PA IC unit then processes these signals according the users selected firmware and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabilizes your multi-rotor craft. The KK2.1.5 Multi-Rotor control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega644PA IC via the aileron, elevator, throttle and rudder inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight
- 6050 MPU system based.
- Signal from Receiver: 1520us (5 channels)Signal to ESC: 1520us
- Easy graphical interfacing with receiver.
- In Built firmware.
- Easy to use for beginners.And the Size is : 50.5mm x 50.5mm x 12mm Weight: 21 gram
kk 2.1.5 flight controllerkk 2.1.5 flight controller setupkk 2.1.5 setupkk 2.1.5 manualkk 2.1.5 wiringkk 2.1.5 flight controller