Arduino Electronic development board

The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 5 keys — select, up, right, down, left and reset. To save the digital IO pins, the keypad interface uses only one ADC channel. The key value is read through a 5 stage voltage divider.

Specifications:

• Operating Voltage: 5V
• Push buttons: 6 

Additional Information:

• Item Code: BE60047
• Minimum Order Quantity: 1 Piece

It is a great kit to new Arduino users and geeks who have sparkling ideas. You can choose to do soldering in the soldering area. You can also make good use of the mini breadboard which can save your time of soldering, to try any circuit you want to the Arduino. You also can choose to use your own breadboard.

Arduino Protoytpe Shield Specifications:-
1.It has a nice standard 0.1" x 0.1" prototying grid with big pads.
2.A IC pattern for adding DIP ICs up to 20 pins
3.Power rails down the middle and sides
4.A reset button and an extra general use button
5.Two general use 3mm LEDs, as well as 2 matching resistors
6.The ICSP header is up top if you like to upload to your Arduino using a programmer
7.A surface-mount chip area for up to 14 SOIC size parts Compatible with either tiny breadboards or ''standard''
breadboards with the rails removed.
8.Every pin is brought out, including the new 3V and Reset header pins
9.Two 0.1uF capacitors on either side for extra power stability. (Purchase Separately)

Additional Information:

• Minimum Order Quantity: 1 Piece
• Port of Dispatch: COIMBATORE
• Delivery Time: ready stock
• Packaging Details: ESD cover

ATMega2560 Development Board with CH340 USB

The ATMega 2560 is functionally identical to the extremely popular and easy-to-use open source Arduino Mega.
The board is based on the ATmega2560 wich runs at 16MHz. It has 54 digital I/O pins (of which 15 provide PWM output) and 16 analog inputs.

Specifications:

• Microcontroller: ATmega2560
• Clock Speed: 16 MHz
• Operating Voltage: 5V
• Input Voltage (recommended): 5.5-9V
• Digital I/O Pins: 54 (of which 15 provide PWM output)
• Analog Input Pins: 16
• Flash Memory: 256KB (of which 8KB used by bootloader)
• SRAM: 8 KB
• EEPROM: 4 KB Does not comes with a USB Cable, which can be purchased separately

Additional Information:

• Item Code: BE60121
• Minimum Order Quantity: 1 Piece
• Port of Dispatch: COIMBATORE

• 1Hz output pin SQW.
• 32KHz output pin 32K.
• Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
• Time Format: HH: MM: SS (12/24 hr).
• Date Format: YY-MM-DD-dd.
• DS3231 based RTC with 2032 Battery Holder.
• Highly Accurate RTC
• Real-Time Clock Counts
• Digital Temp Sensor Output.
• Register for Aging Trim.
• Two Time-of-Day Alarms.
• Programmable Square-Wave Output Signal.
• Configurable I2C device Address for AT24C32 using SMD jumpers on PCB (A0, A1, A2)

Additional Information:

• Item Code: BE50020
• Minimum Order Quantity: 1 Piece

Here’s a handy Arduino shield we’ve had a lot of people looking for a dedicated and well-designed data logging shield. We worked hard to engineer an inexpensive but well-rounded design. Not only is it easy to assemble and customize. The Data Logger module Logging Shield data Recorder Shield also comes with great documentation and libraries.

SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card. It also equips a Real-time clock (RTC) which keeps the time going even when the Arduino is unplugged. And, the most important the battery backup lasts for years. Cool!!!

Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors. The Onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.

This module is compatible with Arduino Uno, to buy it click on the name below

Arduino Uno

Features :

1. Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported.
2. A dedicated and well-designed data logging shield for Arduino.
3. It is easy to assemble and customize, also equipped with extensive documentation and libraries. 

Package Includes : 

1 x Data Logger module Logging Shield data Recorder Shield

 

Additional Information:

• Minimum Order Quantity: 1 Piece

1. Retain the merits of the V4.0 version
2. Laminated design
3. PCB immersion gold processing technology
4. IIC interface
5. Bluetooth module communication interface
6. SD card module communication interface
7. APC220 wireless rf modules communication interface
8. RB URF v1.1 ultrasonic sensors interface
9. 12864 LCD string of line and parallel interface
10. 32 servo controller interface

Package Includes :

1 x Sensor Shield V5 Expansion Board

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

QUICK OVERVIEW

1. Operating Voltage(V): 3- 5
2. Operating Current(mA): 2
3. Communication protocol: I2C
4. Power saving mode
5. Automotive grad
6. Small size, low cost

The MLX90614ESF is an Infra-Red thermometer for non-contact temperature measurements.  Both the IR sensitive thermopile detector chip and the signal conditioning ASIC are integrated in the same TO-39 can. Integrated MLX90614 is a low noise amplifier, 17-bit ADC and powerful DSP unit thus achieving high accuracy and resolution of the thermometer.

The user can configure the digital output to be PWM. As a standard, the 10-bit PWM is configured to continuously transmit the measured temperature in the range of -20 to 120 °C, with an output resolution of 0.14 °C.

Application:

1. High precision non-contact temperature measurements
2. Thermal Comfort sensor for Mobile Air Conditioning control system
3. The temperature sensing element for residential, commercial and industrial building air conditioning Windshield defogging
4. The automotive blind angle detection
5. Industrial temperature control of moving parts
6. Temperature control in printers and copiers
7. Home appliances with temperature control
8. Healthcare
9. Livestock monitoring
10. Movement detection
11. Multiple zone temperature control – up to 127sensors can be read via common 2 wires
12. Thermal relay/alert
13. Body temperature measurement

Features:

1. Works from 3.3V to 5V input, Module has power regulator IC built-in.
2. Standard I2C interface with built 2x pull up resistors
3. When measuring the temperature, please maintain a measuring distance of 1 cm
4. Small size, low cost
5. Easy to integrate
6. Factory calibrated in a wide temperature range: -40 to 125 °C for sensor temperature and -70 to 380 °C for object temperature.
7. High accuracy of 0.5°C over the wide temperature range (0..+50 C for both Ta and To)
8. Medical accuracy of 0.1°C in a limited temperature range available on request
9. The measurement resolution of 0.01°C
10. SMBus compatible digital interface for fast temperature readings and building sensor networks
11. Customizable PWM output for continuous reading
12. Simple adaptation for 8 to 16V applications

Package Includes:

1 x MLX90614ESF Non-Contact Human Body Infrared Temperature Measurement Module

Additional Information:

• Delivery Time: 2 days

1. For beginners who are interested in Arduino
2. A complete set of Arduino’s most common and useful electronic components
3. Infrared sensor receiving module
4. Laser sensor module
5. Temperature and humidity sensor module
6. Infrared sensor module
7. 5v relay module
8. Obstacle avoidance sensor module.

This 37 in 1 Sensors Kit compatible with Arduino is supplied with the variety of sensors which are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.

It comprises 37 Pcs essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.

Tons of updated lessons and Arduino codes are available on google and youtube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.

Please download and refer example Project Book from our ATTACHMENTS tab.

(You can also find required specification data of each sensor in the same PROJECT BOOK.) 

Features : 

1. For beginners who are interested in Arduino
2. A complete set of Arduino’s most common and useful electronic components
3. Infrared sensor receiving module
4. Laser sensor module
5. Temperature and humidity sensor module
6. Infrared sensor module
7. 5v relay module
8. Obstacle avoidance sensor module.

Package Includes :

1. Module Introduction Paper- 1pc.
2. Tutorial CD- 1pc.
3. PS2 Game Joystick Module- 1pc.
4. Infrared Sensor Receiving Module- 1pc.
5. Laser Sensor Module- 1pc.
6. Temperature and Humidity Sensor Module- 1pc.
7. Infrared Sensor Module- 1pc.
8. 5v Relay Module- 1pc.
9. Obstacle Avoidance Sensor Module- 1pc.
10. Finger Detecting Heartbeat Module- 1pc.
11. Sound Sensor Module- 1pc.
12. Metal Touch Sensor Module- 1pc.
13. Flame Sensor mModule- 1pc.
14. 3 Color LED Module- 1pc.
15. Line Sensor Module- 1pc.
16. Linear Magnetic Hall Sensor- 1pc.
17. Rotary Encoder Module- 1pc.
18. Active Buzzer Module- 1pc.
19. Magic Cup Light Module- 1pc.
20. Small Passive Buzzer Module- 1pc.
21. Digital Temperature Sensor Module- 1pc.
22. Broken Light Module- 1pc.
23. The Temperature Sensor Module- 1pc.
24. Double Color LED Module- 1pc.
25. Mercury Medallion Module- 1pc.
26. Hall Magnetic Sensor Module- 1pc.
27. 3 color LED Module- 1pc.
28. Mini Reed Module- 1pc.
29. Tilt Switch Module- 1pc.
30. 7 colour flashing LED module- 1pc.
31. Button switch module- 1pc.
32. Photosensitive resistance module- 1pc.
33. Vibration switch module- 1pc.
34. The knock sensor module- 1pc.
35. The temperature sensor module- 1pc.
36. Analogy hall magnetic sensors- 1pc.
37. The microphone sound sensor module- 1pc.
38. Big reed moduleDouble colour LED module- 1pc.

Additional Information:

• Minimum Order Quantity: 1 Piece

• Power supply voltage: 2.7 V-3.3 V/5 V
• Data interface level: 2.7-5V.
• Resolution: 84 x 48 pixel
• Backlight power supply voltage: highest 3.3 V.
• Backlight: Blue

Additional Information:

• Item Code: BE50018
• Minimum Order Quantity: 1 Piece

CH340G Serial Converter USB 2.0 to TTL 6PIN Module, Newest version for Pro Mini interfaceDescription :-*Built-in USB to TTL Transfer chip.*can be used for USB to TTL electronic projects.*TTL interface output, easy to connect to your MCU.*Status LEDDual 3.3V and 5V Power output, work with 3.3v and 5v target device.

Additional Information:

• Item Code: BE60129
• Minimum Order Quantity: 1 Piece(s)
• Port of Dispatch: COIMBATORE

• Skip the wiring and start playing in 30 seconds
• Slim and slick board design
• Support Arduino UNO and Arduino Mega2560 and other development board Arduino DUE line, without any wiring.
• Arduino libraries provide.
• This board also supports STM32, C51 and other conventional MCU, provide development code.
• Control IC: ILI9481
• Interface: 8bit parallel
• NO Touch screen
• resolution 320×480

Additional Information:

• Item Code: BE50015
• Minimum Order Quantity: 1 Piece